View our full range of Roller Shutter Doors
Curtain
Constructed of rust-resistant galvanised interlocking slats, cold-formed to an accurate profile, interlocked to present a uniform faced curtain. Alternate slats have riveted endlocks to prevent lateral movement.
Supplied complete with a reinforced bottom rail.
Personal Access Door
This is an optional feature. The standard size is a big 5’9” x 2’3” wide, and other sizes can be made to order. They are of rigid frame construction, filled with lath section to match the curtain frame material. The steel framework is supplied primed and ready for painting.

Roller
Constructed from seamless steel tube fitted with internal helical springs of hard drawn steel wire, wound to a maximum diameter and assembled into the roller without stretching or pre-stressing. Bright steel shafts run in ball races, and are strong enough to give full support to the bearings to resist the torque of the springs. The whole roller is greased and sealed before despatch, and comes complete with the necessary supporting brackets.
Electrical Operation
Through machine-cut gears. Electrical equipment includes drip-proof enclosed squirrel-cage motor with integral gear box and magnetic brake (400/440 V – 3pH -50c supply). Reversing on line starter with overload protection and push-buttons marked ‘UP’, ‘DOWN’ and ‘STOP’. A geared limit switch controls curtain travel in each direction. An independent emergency hand chain is fitted to the shutter gear bracket for use in the event of power failure.
Guides
Steel channel guides are mounted on angle iron securing brackets to give necessary support.
Fixing Position
The positions generally chosen are:
- outside face of lintel;
- inside face of lintel;
- under lintel guides at front of coil; or
- under lintel guides at rear of coil
Hood
Can be supplied in galvanised sheet steel, ready for painting by customer. The hoods are intended to cover the rear of the coil, but the gear and motor can also be covered.
Locking Device
A chain anchor fixed to the wall at an accessible point prevents the operation of the shutter when secured. Other locking devices are available.
Manual Operation
Easily operate our roller shutter doors using either a hand chain or a pole-and-hook mechanism.
Our Accreditations and Certificates
Contact Us
Please send details of your requirements and we will deal with your enquiry and respond as soon as possible.
You can also contact us via phone or email.
Phone: 01204 392 000
ACCESS DOOR SYSTEMS ltd
Unit 1, Farnworth Industrial Estate,
Emlyn Street, Farnworth,
Bolton, BL4 7AQ